HI3822

Sulfite Chemical Test Kit

$99.00

The HI3822 is a chemical test kit that uses a titrimetric method to measure sulfite as sodium sulfite (Na₂SO₃). The HI3822 is subplied complete with all of the reagents and equipment necessary to perform approximately 110 tests.

Pre-made reagents for ease of use
All reagents marked with expiration date and lot number for traceability
Manual titration performed with starch indicator

*Products classified as Dangerous Goods can only be shipped via ground.

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

The HI3822 is a chemical test kit that determines the sulfite concentration in two ranges: 0 to 20 mg/L and 0 to 200 mg/L Na₂SO₃. The HI3822 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 110 tests.

Features at-a-glance

Complete setup

All required materials are included with the test kit, such as the sample beakers, indicator and reagent bottles, and calibrated syringe.

High resolution

Readings from 0 to 20 mg/L are determined to 0.2 mg/L resolution.
Readings from 0 to 200 mg/L are determined to 2 mg/L resolution.

Replacement reagents available

There is no need to buy a new kit when reagents are exhausted. The HI3822-100 can be ordered to replace the reagents supplied with the kit.

Significance of Use

There are many reasons to monitor the concentration of sulfite in water. In boiler feed and effluent waters, a sulfite concentration of approximately 20 mg/L must be maintained to prevent pitting and oxidation of metal components. A high level of sulfite results in a lowered pH, thus promoting corrosion. The monitoring of sulfite is important in environmental control as well. Sulfite ions are toxic to aquatic lifeforms; the chemical demand that sulfide produces on oxygen in water can destroy the delicate ecological balance of lakes, rivers and ponds.

Don't Forget!

Add your reagents or accessories now to save time and money later!

HI3822-100 Sulfite Test Kit Replacement Reagents (110 tests) $54.00

Resources

Specifications

Specification Name	Detail
SKU	HI3822
Type	titration
Smallest Increment	0.2 mg/L (ppm); 2 mg/L (ppm)
Method	iodometric
Number of Tests	110 avg
Ordering Information	HI3822 test kit comes with 30 mL sulfamic acid solution, 30 mL EDTA reagent, 15 mL sulfuric acid solution, 10 mL starch indicator, 120 mL titrant solution, 20 mL calibrated vessel, 50 mL calibrated vessel and calibrated syringe with tip.
Reagent	HI3822-100
Sulfite Range	0.0-20.0 mg/L (ppm); 0-200 mg/L (ppm)

Product Manuals

ISTR3822R3_09_05 Download